IC electronic components

Diodes Incorporated has introduced Enhanced Mini 12V P-channel MOSFET – DMP1245UFCL, enhance cell efficiency and reduce board space, and meet the space limitations of the portable product design requirements, such as smart phones and tablet computers.

The new MOSFET using ultra-precision and high thermal efficiency DFN1616 package, and has a low on-resistance (RDS (on)) characteristics, the level can minimize conduction loss, thus extending battery life. For example, under the conditions of VGS of 4.5V, the MOSFET on-resistance of only 29mΩ, than its nearest competitor product performance but also excellent on-resistance of 15%, is conducive to power outages and general application of the load switch .

DFN1616 standard off-board cross-section of 0.5 mm thinner than its rival’s products 20%, and only 2.56 mm2 area of the printed circuit board (PCB), than the competition with Type 2 mm by 2 mm larger package saves 55 % of the space.

Meanwhile, DMP1245UFCL to provide users with anti-static discharge (ESD) of the enhanced protection. The rating of the MOSFET gate protection to 3kV, 50% higher than similar products, so the anthropogenic impact of electrostatic discharge strong to resist the effect.

November 29, 2011 – Recently, Vishay Intertechnology, Inc. (NYSE stock symbol: VSH) announced the industry’s first release modulated by the discrete photodiode for receiving infrared remote control signal demodulation IC — VSOP383 .. and VSOP584 .., to expand its optoelectronics product portfolio. VSOP383 .. and VSOP584 .. series the use of small 2mm x 2mm x 0.76mm QFN package that can handle continuous data transmission, wide supply voltage and low supply current characteristics.

Vishay’s standard remote control receiver is the photodiode and the signal modulation IC assembly in the same package. VSOP383 .. and VSOP584 .. is the photodiode signal modulation IC and separate, individually packaged in QFN package, for a variety of applications provides a great flexibility. For example, you can use multiple photodiodes aligned in different directions to achieve the wide space of the received signal system, the photodiode can also be used to meet the special requirements of the package, or from non-traditional wavelengths, such as Blu-ray, for underwater operations or visible light communication.

VSOP383 .. and VSOP584 .. using CMOS technology, with a carrier frequency for 36kHZ ~ 38kHZ narrowband filters and intelligent automatic gain control (AGC), to inhibit the fluorescent light emitted interference and other disturbances. Devices for power supply voltage ripple and noise insensitive.

VSOP383 .. and VSOP584 .. can be 2.7V ~ 5.5V power supply, VSOP383 .. the power supply current of 0.35mA, VSOP584 .. the power supply current of 0.85mA. The devices comply with RoHS, at -25 ℃ ~ +85 ℃ temperatures.

VSOP383 .. and VSOP584 .. Samples are available now and production quantities.

RS Components, Pneumatic Tool Company and SMC signed a global distribution agreement again. This further strengthened the two companies since 2009 to establish relations of cooperation, regional cooperation the two sides in the original United Kingdom, PIC16F54-I/SO France, Germany and Italy on the basis of another new Spain, China, Australia and New Zealand. In addition, RS Components product range to expand distribution to SMC’s full range of pneumatic control equipment.

New global distribution agreement is a key strategy for RS Components suppliers committed to work together to meet customer needs and focus on the future development of our customers the best example. After signing the new agreement, RS Components in the worldwide distribution of products will be more comprehensive, and this is the implementation of the overall maintenance strategy to maintain a high level of supply of key products. Moreover, this also makes the RS Components in the most favorable price and best service for our customers supply SMC’s family of products, including pneumatic tools actuators, connectors, control valves and regulators, etc.

Electrocomponents plc, maintenance products, general manager Kevin Thompson said: “The new agreement not only highlights the RS Components and SMC in the importance of cooperation within Europe, but also highlights the two sides are on a global scale the importance of cooperation, we have a solid high-end services, global distribution capabilities, while SMC holds a leading technology and,PIC16F628A-I/P therefore, SMC cooperation will help us to deliver the most advanced air control technologies to better meet customer needs. this collaboration strengthens our automation and control market position, the market is our focus in the field of maintenance of the technology products market. ”

SMC Pneumatic Tools (UK) Steve Bangs, Managing Director, said: “We co-operation with RS Components is very successful and we are delighted to further strengthen cooperative relations between the two sides this partnership to make our products more widely into the RS Components of the global distribution network will help us expand our customers on a global scale, thereby enhancing our industry-leading products – sales of pneumatic control products. “

Recently, EU regulators have begun to Samsung Electronics and Apple patent dispute between the anti-monopoly investigation. This is the EU’s self-regulatory action, not a company should be a requirement to do so.

Consumer electronics industry, the European Commission’s antitrust division director Per Hull Strom (Per Hellstroem) said Wednesday in London, the EU’s “preliminary investigation” is mainly Apple and Samsung Electronics in order to determine the use of the patent. He said: “We have not received a formal complaint when we find some competition issues may be involved, we have the power to obtain information to interested parties.”

EU regulators said that Samsung Electronics and Apple has received the European Commission’s questions, mainly about “the mobile communications industry and the use of standards-related patents.” Last month, Apple said in a court document, because “too much” abuse of patent rights, Samsung Electronics is facing EU antitrust investigation.

According to data from Samsung, Apple and Samsung Electronics launched the world’s 10 countries with each other at least 30 lawsuits. Apple also Motorola (microblogging) Mobile and HTC (microblogging) launch of the Android device to bring patent litigation.

Powerchip in 2012 will significantly reduce the amount of standard DRAM cast films, in order to maintain a minimum capacity of DRAM technology development, and in the next year transferred to 30nm 4Gb full production, and empty out the capacity NAND FLASH will be filled follow-up technical development focus has shifted to the NAND 2Xnm of process scaling. The distant future, the PSC will retain DRAM microchip technology, and to be 3D-IC TSV technology is mature, it will do to the memory chip set as the center of integration, trying to become the Greater China region the most complete wafer technology .

With the Powerchip announced to gradually expand its capacity to Flash products, such as LCD Driver with original OEM and non-standard DRAM products, hope that next year’s standard DRAM chip tape-total investment amount of only 20% of PSC will a foundry with Flash as the main business of the company, but also be declared out of standard DRAM market, compared with international companies, Taiwan’s DRAM industry because the process is slow and turn into too much on the proportion of standard DRAM, the result so far this year loss amounted to NT $ 58.6 billion yuan, due to the DRAM industry is still in oversupply situation, coupled with international companies active in the fourth quarter into the 30nm process, DRAMeXchange (TrendForce) estimated half of next year is still an oversupply of more than 15%, the Ministry of were Taiwan-based DRAM makers have begun restructuring the road, in addition to the aforementioned PSC addition, TI(texas instruments) the park will be gradually transferred Ruli Ji-based and server-based memory, Inotera, Micron’s server in the order of memory, it is also hoped proportion of the server memory to pull 30-50%, Winbond is already a successful transformation, specializing in mobile and NOR Flash memory as the main market.

Looking at 2012, Taiwan-based DRAM makers will be the key to the transformation of years, as long as the standard memory can reduce the volume of production, will have the opportunity to survive in a tough market down.

Avago Technologies announced a meeting at the SC11 supercomputing show can be used for the emerging high performance computing (HPC) applications offer industry-leading bandwidth parallel optics technology. Avago show is its small size MicroPOD ™ and MiniPOD ™ embedded parallel optical transmitter and receiver modules,IC Electronic Components can provide 120 gigabit per second (Gbps) of bandwidth, and technical support and other companies, cloud computing and virtual server applications provide the required data transmission capacity.

PLX Technology and the joint on-site demonstration shows the use of Avago MiniPOD industry’s first technology to PC and I / O expansion box connected to the PCI Express (PCIe) Gen3-end fiber optic link. In another mechanical samples also show the use of Avago MicroPOD optical technology of the Altera FPGA concept. Avago in this November 14-17 at the Washington State Convention Center SC11 demo will be available in addition to mechanical samples, will also showcase its wide range of industry-standard pluggable module types, Booth 5315 .

“Avago is committed to innovation and technology companies, such as PLX and Altera cooperation, expand the device to the device, board to board and chip-to-chip optical connections,” Avago Fiber Products Division marketing director Victor Krutul said. “Our embedded parallel optical modules provide unmatched bandwidth and interconnect density, is conducive to high performance computing applications, and cloud computing and virtual server to create the future.”

PCIe demo shows MiniPOD technology uses a PLX ® PEX8748 PCIe Gen3 switch, 64 Gbps bi-directional in the case of fully connected, so that the device to pass data between devices extend up to 30 meters. Optical PCIe provides outstanding data center solutions, due to the complexity of the standard conversion to eliminate the delay, so that the application of PCIe technology has been extended.

“Our partnership with Avago’s optical solution is the excellent performance of the application into the PCIe Gen3,” PLX’s senior director of hardware applications that Reggie Conley. “Our PCIe Gen3 technology is a new generation of data centers for maximum throughput and easy plug and play functionality.”

Altera’s FPGA concept for optical as HPC, distributed server clusters, multi-chassis network switches and routers, and high-speed backplane applications. The technology combines programmable logic, advanced SERDES, and the advantages of high-density optical modules, can improve signal integrity and optical port density, and reduce the PCB size and power consumption.

MicroPOD and MiniPOD embedded parallel optics – the world’s highest bandwidth interconnect technology

Avago embedded parallel optical devices with industry-leading density and bandwidth. The optical module allows the device’s internal design more flexible, and without EMI / RFI shielding. These features help the next generation of supercomputers scientific breakthrough, and in high-performance routers, switches, and other providers of cloud computing, virtualization microchip pic and server applications such as video-on-demand data center equipment advantage.

Avago MicroPOD and MiniPOD embedded parallel optical modules with speeds up to 12 10.3125Gbps send or receive channels, each channel consumes only 125mW. MicroPOD device has an LGA electrical interface, size 8.2 mm x7.8 mm, suitable for ultra compact embedded solution, MiniPOD array uses 9 mm x9 mm MegArray ™ connector, the size of 22 mm x18.5 mm, embedded solutions for simplified and easy to manufacture.

U.S. high Sammy’s (Microsemi) products that enhance the anti-radiation line, providing the industry’s first 120V, 50W high reliability single, dual and triple output DC-DC converter radiation series. Powerful SA50-120 series is aimed at more than 5kW load power satellite applications of standard products. New DC-DC converters can now mass supply.
Sammy’s new U.S. high DC-DC converter using industry-standard package, suitable for direct or through the load point (point-of-load, POL) converters to drive the high reliability satellite power conversion applications, to further the power “gradually reduced “to the customizable system-on-chip (customizable system-on-chip) solutions and field programmable gate arrays and other devices.

Four decades, the United States has been demanding high Sammy space applications solutions, the company has over 150 fully qualified for space applications, including converters, customizable system-on-chip (customizable system-on-chip, cSoC ) solution, MOSFET, rectifiers, switching diodes, transistors and zener diodes. These comprehensive solutions include a wide range of standard and custom product space.

U.S. high-power management Sammy’s vice president and general manager Robert Warren said: “The aerospace industry tend to use higher power satellites equipped with high voltage main power bus, which allows manufacturers to significantly reduce the primary power bus wiring size and weight. this shift has spurred higher with the main power bus voltage interface capabilities of the anti-radiation device needs. U.S. high Sammy once again move forward, providing high performance solutions to meet evolving industry needs. “